P75 Two-Channel, 75W, Dual Source Amplifier

The P75 is a 2-channel dual source power amplifier with autosource switching. It features two audio line inputs with a loop out to another zone, receiver, or device from Line 2 source. This amplifier can be used for power upgrades in specific zones, for speaker selector or volume control systems.

 

 

 

The P75 is a Class A/B amplifier rated at 75 watts per channel into 4 ohms, and 60 watts into 8 ohms. With the Stereo/Bridge Mono switch in Bridge Mono position, both amplifier channels are combined for a higher powered mono output. In Bridge mode the X75 is rated at 160 watts of power into a single 8 ohm load.

Not available to countries requiring CE certification. 110v only.

 

  • Built for multi-speaker applications with volume controls
  • Automatic switching between two sources with signal sensing
  • Front panel volume and balance controls
  • Channels are bridgeable to create one channel with 160 watts of power
  • Shipping Dimensions: 10.5" (W) x 4.5" (H) x 20.0" (D), (26.7 x 11.4 x 50.8 cm)
  • Shipping Weight: 11.5 lbs (5.2 kg)
  • Crosstalk: > 70dB @ 1 kHz
  • Frequency Response: 10Hz to 30kHz +0.0dB/- 3.0dB @ 8 ohms, 1 W
  • Input Sensitivity: 900mV for 50W at 8 ohms
  • Power Output: 60W per channel at 8 ohms
  • Power Requirement(s): 120VAC 60Hz 4.2A
  • Signal to Noise Ratio: 100dB A-weighted

 

P75 Product Manual: P75_Product Manual.pdf

P75 Product Brief: P75_Product Brief.pdf

 

 

P75 Front: P75_Front.jpg

P75 Rear: P75_Rear.jpg